Sold Out

MMF-9.3 Turntable



The distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable. Sorbothane hemispheres separate each of the three platforms and provide additional suspension and vibration damping.

The mmf-9.3 comes in a high-gloss piano black lacquer finish and is available with or without a Goldring Eroica LX cartridge.


Out of stock


  • Music hall’s unique triple plinth construction. Sorbothane hemispheres separate each of the three platforms and provide additional suspen- sion and vibration damping.
  • one-piece full carbon fibre tonearm
  • counterweight’s centre of gravity is level with the stylus tip, is de- coupled from the arm, and acts as a resonance damper
  • completely isolated/decoupled DC motor with 33 1⁄3 and 45 rpm speed controls located in the front left corner of the turntable, thus cancelling any potential vibration from the motor/belt to the cartridge
  • motor sits on its own resonance damping puck
  • optional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylus ($1,099 value)
  • the cartridge supplied is properly aligned and mounted
  • inverted ceramic main bearing for super quiet, fluid operation
  • non resonant, 1” thick acrylic platter
  • soft felt platter mat
  • high quality gold RCA connectors and detachable phono cable
  • adjustable tip toe feet with anti scratch cups
  • low noise fully manual belt drive design
  • built-in round spirit level for proper levelling
  • dust cover and 45 rpm adaptor included
  • excellent instruction manual and easy assembly
  • 463.5 (W) x 336.5 (D) x 184.15 (H) mm 18.14kg

Goldring Eroica LX

The Eroica LX is a true audiophile moving coil cartridge which features an advanced pole shoe design using a powerful rare earth Neodymium magnet.

This unique construction allows a shortened magnetic path, which helps reduce the amount of iron in the record cartridge, keeping the weight down to just 5.5 g. Rigidity is also of prime importance and the Pocan body of the cartridge enables it to be clamped solidly to the headshell, keeping energy losses to an absolute minimum. This cartridge uses a Gyger II line contact stylus with a low output which means it must be used with an amplifier which features a dedicated moving coil phono input.

The Eroica LX offers an exceptionally high standard of performance and reliability.

Frequency Response 20 Hz – 22 kHz 2 dB
Channel Balance within 1 dB @ 1 kHz
Channel Separation better than 25 dB @ 1 kHz
Sensitivity 0.5mV 1dB, 1kHz @ 5 cm/sec
Static Compliance 30 mm/N
Dynamic Compliance @ 10 Hz 18 mm/N
Equivalent tip mass 0.35 mg
Vertical Tracking Angle 24°
Stylus Radius Gyger II
Stylus Type Non-Replaceable
Load Resistance 100 Ω
Load Capacitance 100 – 1000 pF
Internal Inductance 12 uH
Internal Resistance 8 Ω
Cartridge Mass 5.5 g
Cartridge Mass (inc fixings) 6.6 g
Fixing Centre 0.5″ (12.7 mm)
Playing Weight 1.5 – 2.0 g (1.7 g nom.)


There are no reviews yet.

Be the first to review “MMF-9.3 Turntable”

Your email address will not be published.